JBI Suspension Anodize Coatings

• Lower fork axle lug anodize $225/set
• black only
• Outer fork tube anodize semi gloss $450
• Coats outside only of tube.
• Semi gloss finish
• Colors: Fauxshima brown, black, red, blue, green, yellow, gold, orange, purple, grey
• Outer fork tube anodize high gloss $600
• Coats outside only of tube
• High gloss wet look finish
• Each tube is polished to a mirror finish before anodize
• Colors: Fauxshima brown, black, red, blue, green, yellow, gold, orange, purple, green
• Anodize misc small suspension parts $225/batch
• black, red, blue, green, yellow, gold, orange, purple, grey
• Machined parts can be polished before anodize to achieve glossy shiny finish
• A small additional handling fee is applied to each part that is polished

What is JBI Suspension Anodize?
The anodizing process forms an abrasion resistant and sealing oxide layer on aluminum, titanium, and magnesium metals.   This is accomplished in a low temperate bath solution of sulfuric acid charged with a electrical current.  Anodize coatings evenly penetrate into the part and build up onto the part being coated.  Commonly referred to as a 50/50 coating.  50% penetration.  50% build up.  JBI Suspension Anodize is performed at a specialist anodize facility that has decades of experience coating suspension and related motorsports parts.  This valuable experience provides consistent and beautiful anodize finishes every time.

1.2.23

Motocross | Off-Road | WORCS | Enduro | Free Riding | Arenacross | Freestyle Moto